Please Note: The TDSi Warehouse will be closed for Stock Take on 1st and 2nd December 2026. All orders due for dispatch on these days will be dispatched on Thursday 3rd December 2026.

EXsmart 2 Square MIFARE CSN Reader

5002-0435

Drawing on the proven MIFARE® smartcard technology, EXsmart² offers a high-quality range of readers that can be flush-mounted into a standard electrical box.

Available as reader only, or combined reader and keypad, EXsmart² allows added security if desired by requiring both the card to be presented and the PIN to be entered before access is allowed. All products are supplied with a choice of covers, making the reader customisable to its surroundings.

Benefits

50 mm (nominal)

102 x 102 x 20 mm

13.56 MHz (nominal)

9 to 16 VDC, 100 mA max

TDSi Part No. 5002-0435 / 5002-0436
Dimensions 102 x 102 x 20 mm Connector including terminal block protrudes by 11 mm from the rear face.
Weight 270g
Operating Environment -20°C to +55°C, 0 to 95 %RH (non-condensing)
Power Supply 9 to 16 VDC, 100 mA max
Operating Frequency 13.56 MHz (nominal)
Card Technology ISO14443-A: MIFARE Standard (1k) MF1 ICS50, MIFARE (4k) MF1
ICS70
Sounder Integral with external control
LEDs 2 – red and green both with independent external control. Bi-colour input capability for connection to TDSi access control units.
Reader Range 50 mm (nominal) with ISO card
Output Formats Magstripe, 26-bit Wiegand

  • Back-box Mounting – EXsmart uses a standard electrical back-box to ensure a neatly fitted installation.
  • Interchangeable Covers – Clip-on covers supplied in either graphite or grey, allowing you to adapt the look of the reader to suit the surroundings.
  • Two Reader Mode – Reduce cost and installation time by using MICROgarde to control 2 doors both with read-in/read-out.
  • Pluggable Terminal Block Cable Termination – This allows the cable to be pre-wired before installation of the reader for convenience.
  • Fully Encapsulated Design – Suitable for mounting both indoor and out, the design provides maximum protection against water ingress.
  • Integral LEDs and Sounder – Gives the user unambiguous audible and visual indication of card reads and access status, maximising user confidence.
  • Industry Standard Outputs – Allows connection to all standard access control panels.
  • Read Range – EXsmart has a read range of up to 50 mm.

EXsmart MIFARE CSN Reader Datasheet

Download

Newsletter